Launch X431 X-PROG 3 Vehicle Immobilizer Programmer Key programmer tool supports EEPROM read and write Key read and write

Product Description

X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device thatcan read/write keys to the vehicle.Compatible with X-431 series diagnostic scanners,X-PROG 3 enables Anti-theft type identification,Remote control matching, Key chip reading& matching, anti-theft password reading and anti-theft component replacement.

 It is mainly used for reading and writing car key chip data, including EEPROM reading and writing, on-board MCU reading and writing, for Mercedes-Benz infrared key generation, special key generation, for BMW engine ins code reading, for BMW cas4 + 1 FEM chip reading and writing, etc. it can be used with a variety of comprehensive diagnostic equipment, without binding, flexible,stable and reliable products. It is suitable for automobile electronic industry 1 locksmith 1 maintenance factory and other professional users.

LAUNCH X431 X-PROG 3 Compatible with

1. X431 Serial : X431 V, X431 PRO3S+, X431 V+,X-431 PRO V4.0, X-431 PRO 3 V4.0,ect

 Support Function: Read PIN Code, Delete anti-theft, Delete key and Matching key

 2. X431 PAD Serial: X431 PAD III V2.0, X431 PAD V, X-431 PAD VII, X431 PRO 5, etc...

 Support Function : Read PIN, Delete anti-theft, Delete key, Matching key, Module replacement and Module cloning

LAUNCH X431 X-PROG 3 Advantages

1. Supports For VW/for AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

 2. Supports For VW/for AUDI MQB platform gearbox ECU replacement or cloning.

 3. Supports ECU replacement for the fifth-generation of For Audi (0AW/0B5) gearbox.

 4. Supports reading, writing & cloning the ECU for the fourth-generation of For VW UDS engine.

 5. Supports for BMW E chassis 8HP gearbox ECU reprogramming to empty.

 6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

LAUNCH X431 X-PROG 3 Features

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and for BMW CAS4+/FEM chips, for Mercedes-Benz infrared keys, generating special keys, reading for BMW engine INS code.

 2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated.

 3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

 4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

LAUNCH X431 X-PROG 3 Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

 2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

 3. Supports ECU replacement for all lost without disassembly for VW/for AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

 4. Supports ECU replacement for the fourth-generation of For VW/for AUDI engine;

 5. Supports ECU replacement for the fifth-generation of For VW/for AUDI Bosch and Siemens engines.

 6. Supports the all lost and replacement for the fourth generation of For AUDI EZS, comfortable ECU, and KESSY IC.

 7. Supports the For BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

 8. Supports the For BM-W CAS4/CAS4+ module replacement.

 9. Supports the ECU cloning and replacement for BM-W Siemens engines.

 10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

 11. Add the function of calculating the password for the for Mercedes-Benz key within 1 minute

Key Programming

You can use anti-theft system to access key chip programming functions. The product supports reading, retrieving and writing key information, as well as other key-related functions.

Gearbox Programming

You can use gearbox programming function to restore the old gearbox data or write in new data after a new gearbox is replaced.

Engine Programming

The engine programming function supports engine data reading, after a new gearbox is replaced, you can use engine programming function to write in the backup data.

LAUNCH X431 X-prog 3 Supports Car List

For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Bmw, For BriBmw, For Bugatti, For Chang An, For Chevrolet, For Citroen, For Dacia, For Dallara, For Dodge, For Ferrari, For Fiat, For Ford, For Freightliner, For Geely, For GMC, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For JMC, For Kia, For Lamborghini, For Lancia, For Land Rover, For Lincoln, For Mahindra, For Maserati, For McLaren, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Saab, For Seat, For Skoda, For Subaru, For Suzuki, For Toyota, For Vauxhall, For Volkswagen (VW), For Volvo, EEPROM

How to use X-PROG 3 to read and write data?

Method 1:

 use main cable to connect car OBD2 16pin interface, and X-PROG 3, with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.

 Method 2:

 Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

 Method 3:

 After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host

Technical specifications

Input voltage: 12 V DC

 Input current: 500 mA

 Working temperature: 0 to 50 ℃

 Storage temperature: - 20 to 70 ℃

 Dimension: 39 x 107 x 298 mm

LAUNCH X431 X-PROG 3 Packing List

- Main unit

 - Power adaptor

 - Main diagnostic cable

 - The fourth-generation data acquisition cable

 - The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)

 - BENCH mode cable. MCU converter V1. MCU converter V2

 - Mcu cable with multiple leads.EEPROM chip adaptor

 - For Mercedes-Benz infrared analog acquisition key

 - MCU cable with multiple leads EEPROM converter

 - User Manual